Как найти сервер exchange

If you are using the Exchange Server to manage your emails, then you do not need to know the address of the Exchange Server as it is quite robust to manage the environment itself. But some circumstances such as bad Exchange Server performance, need to create a new Outlook profile or configure Exchange Server account again force you to locate the address of your Exchange Server account and use the details.

Exchange administrators can utilize the Exchange Management Shell to get the Server details by running the following cmdlet.

Get-ExchangeServer

This command would display the attributes of the Exchange Server as the result.

After finding your Exchange Server address, user can utilize the Exchange Server address to fix issues with the incoming and outgoing messages.

There are other easy ways to find the Exchange Server address as described below.

Using Microsoft Outlook

Here is the simple procedure to know the Exchange Server address of your account;

1. When an Outlook application is connected with the Exchange, then you can identify the connection by checking the status shows as ‘Connected to Microsoft Exchange’ at the bottom of the Microsoft Outlook home page.
2. Now click the File option present at the top left-hand side.
3. In the Info category, click Account Settings, and again click Account Settings.
4. Select your Exchange Server account and click Change.
5. In the Server Settings, check the Server field where the full Exchange Server address is displayed to you.

Using Outlook for Mac

For the Outlook for Mac users, you need to follow the steps a little differently;

1. Click Outlook, then Preferences.
2. Select ‘Accounts.’
3. In the details of your account, click the Advanced button.
4. In the Microsoft Exchange Section on the Server tab, you will find the whole server name and address in the Server field.

iPhone Mail

The Outlook is also accessible to your mobile device and the iPhone users will find the Exchange Server Address by following the below steps;

1. Click the Settings option in the menu.
2. Then select the Mail section.
3. Choose the account that is your work mail.
4. In the Exchange area, select your account.
5. In the Server field, you will find the whole address of your Exchange Server account.

Now you are aware of the address of the Exchange Server, then you can engage with various activities. You can further check the settings of the Exchange Server Settings.

Cached Mode

When you had accessed the Exchange Server in the Microsoft Outlook, then you must have seen the cached mode. The cached mode allows you to work on account’s messages even when there is no active connection with the Exchange Server. This offline mode is called the cached mode.

Outlook saves a copy of all your emails and contacts in the offline file in the computer in the OST (Offline Storage Table) file. The OST file is actively synchronized with the Exchange Server connected with your organization. The OST file is the exact copy of your Exchange Server mailbox.

If you connect the Exchange Server with any other account on a different computer, then it will create a new OST file again, so you do not need to have a backup file on your computer. Similarly, you can use the OST file to open your mailbox data to another Outlook application in a different account.

When your organization chooses the Exchange Server to manage your emails, then there are following types of email account that the Exchange Server will support;

Exchange ActiveSync

In the Exchange ActiveSync, there are MAPI/HTTP methods to access the emails from any remote device like a smartphone, tablet, or laptop. When you access your Exchange emails, then you are not downloading them to your system, but are accessing them from the Exchange Server itself. ActiveSync also allows you to access your emails even when you are not connected to the Internet.

IMAP

IMAP follows the same suite of the ActiveSync that allows you to access your emails from any remote device like laptop, tablet, or smartphone. Here you are accessing the emails from the Exchange Server rather than downloading them to your system.

Moreover, the IMAP account synchronizes all your account’s emails, deleted items, sent items with the Exchange Server. It also facilitates you to with limited calendar storage, but you cannot collaborate your calendar entries with another.

POP

The POP account has limited functionality than the previous two. When you are accessing your emails from the Exchange Server in the POP account, then you are downloading the email to your local computer. Then the email is deleted from the Server. Now you can access the email at the local computer only. When you access the email account from any other computer, then you will not find the deleted email there.

You can launch Outlook Web Access (OWA) email client which can be used to know the Exchange Server address. The navigating path as follows-

Settings > Mail > Options > Mail > Accounts > POP and IMAP > Please note down values from POP Setting and IMAP Setting.

There are some following secure troubleshooting methods which any user can perform without dependency on Exchange Administrator.

1. Restart your Outlook: It’s very easy method to resolve the connection issue. If restarting your Outlook does not work, then you can restart the computer. At times, when the Internet is slow down, the connection between Outlook and Exchange Server also does not establish. So, after restarting the Outlook may fix the connection issue. If this method does not work, then move to the other troubleshooting method.
2. Run a repair installation: If you want to remove the connection issues, you can run a repair installation from the Control Panel. Steps are as follows –
   1. First close the Outlook application and open the Control panel.
   2. Click on Programs and Features.
   3. Select Microsoft Office and then click Change.
   4. Click on Repair and then select Continue.
   5. After completion of the repair process restart the computer.
   6. At last Run Outlook and check its connection status.
3. Disable the offline mode: Sometimes, the user set the Outlook mode to the offline by mistake; it stops all incoming and outgoing emails. So, you need to disable outlook mode option and connect Outlook with Exchange. Steps are as follows-
   1. Click on the Send/Receive option on the menu.
   2. Go to the Work Offline button and click on it.
   3. Now the Outlook will change to ‘Trying to Connect’ from ‘Offline.’ After some time it will shows connection between outlook and exchange.
4. Create again the OST file: The OST file is stored on the local computer, so high chance that it may get corrupt due to any virus attacks or hardware issues. A corrupt OST file can cause the Outlook application connecting failure with Exchange Server. So, you need to recreate the OST file again, and it may resolve the connection failure issue of the Outlook. Steps are as follows-
   1. Open Control Panel and select the Mail option.
   2. Now click on the E-mail Accounts option.
   3. Then select your account and click Open File Location to locate OST file. It will redirect to the location of the respective OST file.
   4. Now select the OST file, right-click on it and then select the Delete option.

At last start the Outlook again. After recreating the OST file it allow you to connect with Exchange Server.

Finally

Exchange Server is a robust and self-dependent platform to manage your professional emails effectively. You will hardly find any issue related to its security or management. But whenever there are issues in the Exchange, then you should never take chances with your precious emails and use the professional assistance from any export. You can either consult with the Exchange Server expert or use any third-party Exchange Server Recovery software to recover the data.

Download Now

Read time 5 minutes

Microsoft Exchange Server handles the substantial amount of business communication of enterprises and allows them to get emails without any latency. But, when there is an issue related to the performance of Exchange, then Outlook users need to run some troubleshooting like creating a new Outlook profile. Sometimes, they need to know the address of the Exchange Server too. In the present article, we will go through how to find out Exchange Server address; also, we will go through some simple methods for resolving our common connectivity issues.

Find Exchange Server Address

1. Start the Outlook. When Outlook has an active connection with Exchange Server, then it shows its status as ‘CONNECTED TO: MICROSOFT EXCHANGE.’ Ensure this connection to proceed further in the process.



2. Click the File option on the menu.



3. Click Account Settings>>Account Settings.



4. Here, select the Exchange Account with the Server name you want to check and click Change.



5. In the Server Settings section, you can see the full name of your Exchange Server.

Outlook Web Access (OWA) email client can be used as well. So, how to find out exchange server address with OWA. You just need to navigate to

Settings>Mail>Options>Mail>Accounts>POP and IMAP>note down values from POP Setting & IMAP Setting.

Or you can run the following command in the Exchange Management Shell run as administrator to get all attributes of the Exchange Server including the address.

Get-ExchangeServer

After accessing your Exchange Server address, you can utilize it to fix issues with the incoming/outgoing messages. But in some conditions, Outlook faces problems in connecting with Exchange Server, and you keep shuffling between different methods to remove the problem. All in all, Get-ExchangeServer cmdlet is one of the best ways to get all the answers on how to find Exchange Server name and other related attributes.

Let’s go through some secure troubleshooting methods which any user can perform without being dependent on Exchange Administrator.

1. Restart Outlook
It is the simplest method to resolve the connection issue. If restarting Outlook does not work, then restart the computer. Many times, when the Internet is down, the connection with the Outlook and Exchange Server also does not establish. So, restarting the Outlook should fix the connection issue due to minor connection related problems. When restarting Outlook does not work, then move to the next troubleshooting method.

2. Disable the offline mode
Generally, the users set the Outlook mode to the offline mode unknowingly, and it stops emails from incoming and outgoing. So, you should disable this option and connect Outlook with Exchange.

1. Click the Send/Receive option on the menu.
2. Go to the Work Offline button and click it.
3. The status of the Outlook will change to ‘Trying to Connect’ from ‘Offline.’ Soon it will show the status as ‘CONNECTED TO: MICROSOFT EXCHANGE.’.’

3. Run a repair installation

You can run a repair installation from the Control Panel to remove the connection issues.

1. Close the Outlook application and go to the Control panel.
2. Click Programs and Features.
3. Select Microsoft Office and click Change.
4. Click Repair and then select Continue.
5. Restart the computer after completion of the repair process.
6. Run Outlook and check its status.

4. Recreate the OST file

Because the OST file is stored on the local computer, there are high chances that it may get corrupted due to any malware or hardware issues. A corrupt OST file can stop the Outlook application from connecting with Exchange Server. So, you can recreate the OST file again, and it may remove the connection issue of the Outlook.

1. In the Control Panel, select the Mail option.
2. Click the E-mail Accounts option.
3. Select your account and click Open File Location. It will take you to the location of the respective OST file.
4. Select the OST file, right-click it, and select the Delete option.
5. Start the Outlook again. It will recreate the OST file and allow you to connect with Exchange Server.

5. Use the Scanpst tool to repair the corrupt PST file

Outlook offers a default scanning tool called scanpst.exe which repairs the PST file from minor corruption-related issues. You can run the tool and scan the PST file. It will check for errors and will prompt you to fix it if it finds any corruption.

You can find the Scanpst at the following location:

• Outlook 2019 – C:Program Files (x86)Microsoft OfficerootOffice16
• Outlook 2016 – C:Program Files (x86)Microsoft OfficerootOffice16
• Outlook 2013 – C:Program Files (x86)Microsoft OfficeOffice15
• Outlook 2010 – C:Program Files (x86)Microsoft OfficeOffice14
• Outlook 2007 – C:Program Files (x86)Microsoft OfficeOffice12

Conclusion

When Outlook is not connecting to Exchange due to corruption in the data file, then you should not remain dependent on the manual troubleshooting methods which only check for the error but do not provide any concrete solution. Kernel for OST to PST Converter is an outstanding solution which can recover data from corrupt, orphaned, or inaccessible OST files and make its content usable again. You can save the recovered data in a PST file and access it in Outlook.

FAQs